The BLU-50 is a half-rack width processor featuring four inputs and four outputs with configurable signal and logic processing, and a 48-channel BLU link digital audio bus. It offers software configurable gain, phantom power, and LED indicators for signal monitoring. Power options include an included 12VDC supply, 12-48VDC via a terminal block, or PoE+ through the Ethernet port. Controlled via HiQnet Audio Architect™ or HiQnet London Architect™, the BLU-50 integrates seamlessly with other Soundweb London devices, supporting distances up to 100m with standard cabling and beyond 10km using fiber media converters.
The BLU-BOB2 is a 19″ rack-mountable output expander for digital audio systems, offering 8 analog line-level outputs configurable via rear panel DIP switches. It allows selection of any 8-channel range from 256 channels on the audio bus. The device features front panel LED indicators for signal and power status and is powered by an included 12V DC adapter. Compatible with the Soundweb London family, it provides flexible and straightforward audio output expansion.
The BSS Audio BLU-DAN Bridge Processor provides Dante/AES67 connectivity for BLU Link devices, supporting 64 x 64 channels at 48 kHz. Features include primary and secondary RJ45 ports for fault tolerance, an additional RJ45 and RS-232 port for control, LED indicators, HiQnet Audio Architect compatibility, and a half-rack design. It comes with Cat 5e/6 cable compatibility up to 328′, rack mounting hardware, power cable, and rubber feet.
The BSS Audio Soundweb London BLU-100 12×8 Signal Processor is a networked audio routing DSP processor with 12 inputs, 8 outputs, configurable signal processing, and a 48-channel digital audio bus. It supports full configuration via HiQnet London Architect and offers a low-latency, fault-tolerant connection using standard Category 5e cabling up to 100 yards, extendable to over 24 miles with fiber media converters.
The BLU-120 processor, configurable via HiQnet™ Audio Architect, employs a simple drag-and-drop configuration method with a low-latency, fault-tolerant 256-channel digital audio bus using Category 5e cabling for 100m range, extendable to over 40km with fiber optic converters. It features four card slots that support various I/O configurations, including Analog and Digital Input/Output Cards, AEC Input, and Telephone Hybrid Cards, each supporting four channels. Additional capabilities include software configurable gain and Phantom Power for Analog Inputs, and AES/EBU and S/PDIF processing for Digital cards, with extensive clocking and syncing options.
The BLU-160 boasts versatile capabilities with software configurable Analog Input Cards offering gain adjustment in 6dB steps and selectable Phantom Power, along with Digital Input and Output Cards supporting AES/EBU and S/PDIF audio formats and diverse clocking options. Users can effortlessly monitor power, sync, signal, and clip status through front panel LEDs, while detailed device specifics are displayed on the front panel screen. Integration with external systems is simplified via 12 Control Inputs and 6 Logic Outputs, and comprehensive documentation through the Soundweb London Interface Kit is included in the HiQnet Audio Architect installation.
The Soundweb London BLU-320 is a configurable audio processor featuring flexible I/O options, CobraNet audio with fault tolerance, and a high bandwidth digital audio bus. It offers control via HiQnet London Architect with an intuitive drag-and-drop interface and supports 256 channels of low latency digital audio over standard Category 5e cabling, with optional fiber optic conversion for extended distances.
The BLU-805 is a fully configurable, open architecture processor featuring Ethernet AVB audio with primary and secondary ports for fault tolerance, and control through a separate Ethernet port. It offers a drag and drop configuration with a wide range of processing and logic objects, and includes a low latency, fault-tolerant digital audio bus.
The Soundweb London BLU-806 provides customizable input/output and signal processing, integrated Dante audio, and a robust, high-bandwidth digital audio bus designed for fault tolerance.
The Soundweb London BLU-BIB, also known as the “break-in box,” provides 8 channels of analog audio input expansion via a high bandwidth, fault-tolerant digital audio bus. This low-latency expander supports 256 channels using standard Category 5e cabling, allowing for distances up to 100 meters between compatible devices.
The Soundweb London BLU-BOB1 “break-out box” provides 8 channels of analog audio output expansion through a high bandwidth, fault-tolerant digital audio bus. It features a digital audio bus with 256 channels, low latency, and uses Category 5e cabling for up to 100 meters between devices. The 8 analog outputs use terminal block connectors similar to other Soundweb London products.
The Soundweb London Acoustic Echo Cancellation (AEC) Input Cards fit into any of the four card slots on Soundweb London models including BLU-800, BLU-805, BLU-806, BLU-320, BLU-325, BLU-326, BLU-160, and BLU-120, effectively mitigating acoustic echo in conference setups by preventing loudspeaker sounds from being picked up by microphones within the same environment.
The Casio AC Adapter AD-A12150LW-P2-OP2 is a durable and functional 12-volt power supply designed for compatibility with various Casio keyboards, ensuring reliable performance for musicians.
The 1260/1261 ZonePRO systems are designed for superior audio performance and flexibility, featuring Euroblock and RCA connectors for reliable interfacing with both professional and consumer equipment. They include comprehensive input processing tools such as gain control, EQ, paging microphone management, and more. The central Routing module supports primary source selection and source ducking. Outputs provide advanced processing like AutoWarmth® for low-frequency extension, EQ, crossover filters, and delay, making these units ideal for scalable commercial audio applications.
The ZonePRO 1260m is a professional audio device featuring 12 inputs and 6 outputs, designed with fixed I/O, pre-configured architecture, and configurable insert processing. It supports balanced mic/line and unbalanced RCA inputs, along with S/PDIF inputs for digital channels. The hardware-controlled microphone gain can be adjusted per channel, and the device includes AutoWarmth® for consistent frequency bandwidth at varying signal levels. The link bus allows optional audio channel duplication to another ZonePRO device.
In order to provide you a personalized shopping experience, our site uses cookies. By continuing to use this site, you are agreeing to our cookie policy.
